Wika differential pressure gauge DPGS43.100, DPGS43.160

Wika differential pressure gauge DPGS43.100, DPGS43.160

Differential pressure gauge for live contact switches

Suitable for process industry, all metal dielectric cavity

application

Control and adjust process values

Monitor equipment and control circuit on/off

Suitable for measuring points with high overvoltage

Monitoring filters and pumps

Liquid level measurement inside sealed tanks

Functional characteristics

Differential pressure measurement range: 0… 1.6 kPa

High working pressure (static pressure), overpressure safety protection up to 4 MPa

Can provide a liquid filled housing, suitable for high dynamic pressure loads and high vibration environments

Provide instruments with inductive electrical contacts for use in hazardous areas

Provide instruments with switch electrical contacts, suitable for PLC applications

describe

In any case, if you want to perform on/off operations on the circuit while displaying process pressure locally, the DPGS43.1 × 0 pressure gauge from the switchGAUGE series will be an ideal choice.

The switch electrical contact (electronic electrical contact for alarm) can connect and disconnect the electrical control circuit according to the pointer position of the instrument. The switch electrical contacts are adjustable within the full range (see DIN 16085). Usually, electrical contacts are installed under the dial, with only a few installed above the dial. The instrument pointer (actual value pointer) can rotate freely throughout the entire range, regardless of the setting.

The pointer can be adjusted through the detachable adjustment keys inside the window.

The switch electrical contact not only includes multiple electrical contacts, but can also set a single set value. When the actual value pointer exceeds or falls below the set value, the electrical contact will switch.

This model of pressure gauge is manufactured according to the DIN 16085 standard and meets all relevant standards (such as EN 837-3) and safety requirements of specifications. It is fully capable of measuring the working pressure of high-pressure vessels on site.

The switch electrical contacts include magnetic assisted electrical contacts, dry spring resistance chain electrical contacts, induction electrical contacts, and electronic electrical contacts. Induction type electrical contacts can be applied in hazardous areas. Electronic and dry spring resistance chain electrical contacts can be used to trigger PLCs.